Anope IRC Services

Paste ID: 5c951fe4c3

Submitted by: kenji
Date: 08/01/16 17:49:24
Views: 1631

Modify this paste

Post modifications to this paste here.

Paste Form

########################################################################
#                                                                      #
#               ___                ___ ____   ____    _                #
#              |_ _|_ __  ___ _ __|_ _|  _  / ___|__| |               #
#               | || '_ / __| '_ | || |_) | |   / _` |               #
#               | || | | __  |_) | ||  _ <| |__| (_| |               #
#              |___|_| |_|___/ .__/___|_| _\______,_|               #
#                            |_|                                       #
#      ____             __ _                       _   _               #
#     / ___|___  _ __  / _(_) __ _ _   _ _ __ __ _| |_(_) ___  _ __    #
#    | |   / _ | '_ | |_| |/ _` | | | | '__/ _` | __| |/ _ | '_    #
#    | |__| (_) | | | |  _| | (_| | |_| | | | (_| | |_| | (_) | | | |  #
#     _______/|_| |_|_| |_|__, |__,_|_|  __,_|__|_|___/|_| |_|  #
#                            |___/                                     #
#                                                                      #
##################################||####################################
                                 #||#
##################################||####################################
#                                                                      #
#         This is an example of the config file for InspIRCd.          #
#             Change the options to suit your network.                 #
#                                                                      #
#                                                                      #
#    ____                _   _____ _     _       ____  _ _   _         #
#   |  _  ___  __ _  __| | |_   _| |__ (_)___  | __ )(_) |_| |        #
#   | |_) / _ / _` |/ _` |   | | | '_ | / __| |  _ | | __| |        #
#   |  _ <  __/ (_| | (_| |   | | | | | | __  | |_) | | |_|_|        #
#   |_| ____|__,_|__,_|   |_| |_| |_|_|___/ |____/|_|__(_)        #
#                                                                      #
#   Lines prefixed with READ THIS BIT, as shown above, are IMPORTANT   #
#   lines, and you REALLY SHOULD READ THEM. Yes, THIS MEANS YOU. Even  #
#   if you've configured InspIRCd before, these probably indicate      #
#   something new or different to this version and you SHOULD READ IT. #
#                                                                      #
########################################################################

#-#-#-#-#-#-#-#-#-#  INCLUDE CONFIGURATION  #-#-#-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# This optional tag allows you to include another config file         #
# allowing you to keep your configuration tidy. The configuration     #
# file you include will be treated as part of the configuration file  #
# which includes it, in simple terms the inclusion is transparent.    #
#                                                                     #
# All paths to config files are relative to the directory that the    #
# process runs in.                                                    #
#                                                                     #
# You may also include an executable file, in which case if you do so #
# the output of the executable on the standard output will be added   #
# to your config at the point of the include tag.                     #
#                                                                     #
# Syntax is as follows:                                               #
#<include file="file.conf">                                           #
#<include executable="/path/to/executable parameters">                #
#                                                                     #
# Executable include example:                                         #
#<include executable="/usr/bin/wget -q -O - http://example.com/inspircd.conf">
#                                                                     #

#-#-#-#-#-#-#-#-#-#-#-#  VARIABLE DEFINITIONS  -#-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# You can define variables that will be substituted later in the      #
# configuration file. This can be useful to allow settings to be      #
# easily changed, or to parameterize a remote includes.               #
#                                                                     #
# Variables may be redefined and may reference other variables.       #
# Value expansion happens at the time the tag is read.                #
#                                                                     #
# Using variable definitions REQUIRES that the config format be       #
# changed to "xml" from the default "compat" that uses escape         #
# sequences such as """ and "n", and does not support <define>      #
<config format="xml">
<define name="bindip" value="myip">
<define name="localips" value="&bindip;/24">

#-#-#-#-#-#-#-#-#-#-#-#-  SERVER DESCRIPTION  -#-#-#-#-#-#-#-#-#-#-#-#-
#                                                                     #
#   Here is where you enter the information about your server.        #
#                                                                     #

<server
        # name: Hostname of your server. Does not need to resolve, but
        # does need to be correct syntax (something.somethingelse.tld).
        name="myip"

# description: Server description. Spaces are allowed.
        description="Waddle World"

# id: The SID to use for this server. This should not be uncommented
        # unless there is a SID conflict. This must be three characters long.
        # The first character must be a digit [0-9], the remaining two chars
        # may be letters [A-Z] or digits.
        id="00B"

# network: Network name given on connect to clients.
        # Should be the same on all servers on the network and
        # not contain spaces.
        network="PepsyChat">

#-#-#-#-#-#-#-#-#-#-#-#-   ADMIN INFORMATION   -#-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
#   Describes the Server Administrator's real name (optionally),      #
#   nick, and email address.                                          #
#                                                                     #

#<admin
 #      # name: Real Name
  #     name="Johnny English"

# nick: Nickname (preferably what you use on the network)
   #    nick="MI5"

# email: email address. Does not have to be valid
       # but should be for the users to be able to contact you.
    #   email="MI5@the.best.secret.agent">

#-#-#-#-#-#-#-#-#-#-#-#-   PORT CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-
#                                                                     #
#   Enter the port and address bindings here.                         #
#                                                                     #
#                                                                     #
#    ____                _   _____ _     _       ____  _ _   _        #
#   |  _  ___  __ _  __| | |_   _| |__ (_)___  | __ )(_) |_| |       #
#   | |_) / _ / _` |/ _` |   | | | '_ | / __| |  _ | | __| |       #
#   |  _ <  __/ (_| | (_| |   | | | | | | __  | |_) | | |_|_|       #
#   |_| ____|__,_|__,_|   |_| |_| |_|_|___/ |____/|_|__(_)       #
#                                                                     #
#  If you want to link servers to InspIRCd you must load the          #
#  m_spanningtree.so module! Please see the modules list for          #
#  information on how to load this module! If you do not load this    #
#  module, server ports will NOT work!                                #

<bind
      # address: IP address to bind to if the box that you are hosting
      # on has more than one IP, else the ircd will try to bind to all
      # IP's on the box if this is not defined.
      address="myip"

# port: Port for users or servers to be able to connect to.
      # you can select multiple ports by separating them
      # with a - character like the example below.
      port="6697"

# type: Type of bind block this is. It can either be clients or
      # servers. Whichever you select will be the only type able to connect
      # to this bind section.
      type="clients"

# ssl: If you want the port(s) in this bind tag to use SSL, set this
      # to either "gnutls" or "openssl". The appropriate SSL module must be
      # loaded for SSL to work. If you do not want the port(s) in this bind
      # tag to support SSL, just remove or comment out this option.
      #ssl="gnutls"
>

# When linking servers, the OpenSSL and GnuTLS implementations are completely
# link-compatible and can be used alongside each other
# on each end of the link without any significant issues.
# Supported SSL types are: "openssl" and "gnutls".
# You must load m_ssl_openssl for OpenSSL or m_ssl_gnutls for GnuTLS.

#-#-#-#-#-#-#-#-#-#-  DIE/RESTART CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-
#                                                                     #
#   You can configure the passwords here which you wish to use for    #
#   the /DIE and /RESTART commands. Only trusted ircops who will      #
#   need this ability should know the die and restart password.       #
#                                                                     #

<power
       # hash: what hash these passwords are hashed with.
       # Requires the module for selected hash (m_md5.so, m_sha256.so
       # or m_ripemd160.so) be loaded and the password hashing module
       # (m_password_hash.so) loaded.
       # Options here are: "md5", "sha256" and "ripemd160", or one of
       # these prefixed with "hmac-", e.g.: "hmac-sha256".
       # Optional, but recommended. Create hashed passwords with:
       # /mkpasswd <hash> <password>
       #hash="sha256"

# diepass: Password for opers to use if they need to shutdown (die)
       # a server.
       diepass=""

# restartpass: Password for opers to use if they need to restart
       # a server.
       restartpass="">

#-#-#-#-#-#-#-#-#-#-  CONNECTIONS CONFIGURATION  -#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
#   This is where you can configure which connections are allowed     #
#   and denied access onto your server. The password is optional.     #
#   You may have as many of these as you require. To allow/deny all   #
#   connections, use a '*' or 0.0.0.0/0.                              #
#                                                                     #
#  -- It is important to note that connect tags are read from the  -- #
#     TOP DOWN. This means that you should have more specific deny    #
#    and allow tags at the top, progressively more general, followed  #
#        by a <connect allow="*" (should you wish to have one).       #
#                                                                     #
# Connect blocks are searched twice for each user - once when the TCP #
# connection is accepted, and once when the user completes their      #
# registration. Most of the information (hostname, ident response,    #
# password, SSL when using STARTTLS, etc) is only available during    #
# the second search, so if you are trying to make a closed server,    #
# you will probably need a connect block just for user registration.  #
# This can be done by using <connect registered="no">                 #

# connect:reason is the message that users will see if they match a deny block
<connect deny="3ffe::0/32" reason="The 6bone address space is deprecated">

<connect
         # name: Name to use for this connect block. Mainly used for
         # connect class inheriting.
         name="secret"

# parent: This setting is to specify if this connect class
         # inherits settings from any other. Put the other class's name
         # in here to use its settings as a template - for example,  if
         # you only want to adjust sendq and a password
         parent="main"

# allow: What IP addresses/hosts to allow for this block.
         allow="203.0.113.*"

# hash: what hash this password is hashed with. requires the module
         # for selected hash (m_md5.so, m_sha256.so or m_ripemd160.so) be
         # loaded and the password hashing module (m_password_hash.so)
         # loaded. Options here are: "md5", "sha256" and "ripemd160".
         # Optional, but recommended. Create hashed passwords with:
         # /mkpasswd <hash> <password>
         #hash="sha256"

# password: Password to use for this block/user(s)
         password="mypassword"

# maxchans: Maximum number of channels a user in this class
         # be in at one time. This overrides every other maxchans setting.
         #maxchans="30"

# timeout: How long (in seconds) the server will wait before
         # disconnecting a user if they do not do anything on connect.
         # (Note, this is a client-side thing, if the client does not
         # send /nick, /user or /pass)
         timeout="10"

# localmax: Maximum local connections per IP (or CIDR mask, see below).
         localmax="3"

# globalmax: Maximum global (network-wide) connections per IP (or CIDR mask, see below).
         globalmax="3"

# maxconnwarn: Enable warnings when localmax or globalmax are reached (defaults to on)
         maxconnwarn="off"

# usednsbl: Defines whether or not users in this class are subject to DNSBL. Default is yes.
         # This setting only has effect when m_dnsbl is loaded.
         #usednsbl="yes"

# useident: Defines if users in this class MUST respond to a ident query or not.
         useident="no"

# limit: How many users are allowed in this class
         limit="5000"

# modes: Usermodes that are set on users in this block on connect.
         # Enabling this option requires that the m_conn_umodes module be loaded.
         # This entry is highly recommended to use for/with IP Cloaking/masking.
         # For the example to work, this also requires that the m_cloaking
         # module be loaded as well.
         modes="+x"

# requireident, requiressl, requireaccount: require that users of this
         # block have a valid ident response, use SSL, or have authenticated.
         # Requires m_ident, m_sslinfo, or m_services_account respectively.
         requiressl="on"
         # NOTE: For requireaccount, you must complete the signon prior to full
         # connection. Currently, this is only possible by using SASL
         # authentication; passforward and PRIVMSG NickServ happen after
         # your final connect block has been found.

# Alternate MOTD file for this connect class. The contents of this file are
         # specified using <files secretmotd="filename"> or <execfiles ...>
         motd="secretmotd"

# Allow color codes to be processed in the message of the day file.
         # the following characters are valid color code escapes:
         #   �02 or b = Bold
         #   �37 or u = Underline
         #   �03 or c = Color (with a code postfixed to this char)
         #   �17 or x = Stop all color sequences
         allowmotdcolors="false"

# port: What port this user is allowed to connect on. (optional)
         # The port MUST be set to listen in the bind blocks above.
         port="6697">

<connect
         # name: Name to use for this connect block. Mainly used for
         # connect class inheriting.
         name="main"

# allow: What IP addresses/hosts to allow for this block.
         allow="*"

# maxchans: Maximum number of channels a user in this class
         # be in at one time. This overrides every other maxchans setting.
         #maxchans="30"

# pingfreq: How often (in seconds) the server tries to ping connecting clients.
         pingfreq="120"

# hardsendq: maximum amount of data allowed in a client's send queue
         # before they are dropped. Keep this value higher than the length of
         # your network's /LIST or /WHO output, or you will have lots of
         # disconnects from sendq overruns!
         # Setting this to "1M" is equivalent to "1048576", "8K" is 8192, etc.
         hardsendq="1M"

# softsendq: amount of data in a client's send queue before the server
         # begins delaying their commands in order to allow the sendq to drain
         softsendq="8192"

# recvq: amount of data allowed in a client's queue before they are dropped.
         # Entering "8K" is equivalent to "8192", see above.
         recvq="8K"

# threshold: This specifies the amount of command penalty a user is allowed to have
         # before being quit or fakelagged due to flood. Normal commands have a penalty of 1,
         # ones such as /OPER have penalties up to 10.
         #
         # If you are not using fakelag, this should be at least 20 to avoid excess flood kills
         # from processing some commands.
         threshold="10"

# commandrate: This specifies the maximum rate that commands can be processed.
         # If commands are sent more rapidly, the user's penalty will increase and they will
         # either be fakelagged or killed when they reach the threshold
         #
         # Units are millicommands per second, so 1000 means one line per second.
         commandrate="1000"

# fakelag: Use fakelag instead of killing users for excessive flood
         #
         # Fake lag stops command processing for a user when a flood is detected rather than
         # immediately killing them; their commands are held in the recvq and processed later
         # as the user's command penalty drops. Note that if this is enabled, flooders will
         # quit with "RecvQ exceeded" rather than "Excess Flood".
         fakelag="on"

# localmax: Maximum local connections per IP.
         localmax="3"

# globalmax: Maximum global (network-wide) connections per IP.
         globalmax="3"

# useident: Defines if users in this class must respond to a ident query or not.
         useident="no"

# limit: How many users are allowed in this class
         limit="5000"

#-#-#-#-#-#-#-#-#-#-#-#-  CIDR CONFIGURATION   -#-#-#-#-#-#-#-#-#-#-#-
#                                                                     #
# CIDR configuration allows detection of clones and applying of       #
# throttle limits across a CIDR range. (A CIDR range is a group of    #
# IPs, for example, the CIDR range 192.168.1.0-192.168.1.255 may be   #
# represented as 192.168.1.0/24). This means that abuse across an ISP #
# is detected and curtailed much easier. Here is a good chart that    #
# shows how many IPs the different CIDRs correspond to:               #
# http://en.wikipedia.org/wiki/CIDR#Prefix_aggregation                #
#                                                                     #

<cidr
      # ipv4clone: specifies how many bits of an IP address should be
      # looked at for clones. The default only looks for clones on a
      # single IP address of a user. You do not want to set this
      # extremely low. (Values are 0-32).
      ipv4clone="32"

# ipv6clone: specifies how many bits of an IP address should be
      # looked at for clones. The default only looks for clones on a
      # single IP address of a user. You do not want to set this
      # extremely low. (Values are 0-128).
      ipv6clone="128">

# This file has all the information about oper classes, types and o:lines.
# You *MUST* edit it.
<include file="conf/examples/opers.conf.example">

# This file has all the information about server links and ulined servers.
# You *MUST* edit it if you intend to link servers.
<include file="conf/examples/links.conf.example">

#-#-#-#-#-#-#-#-#-#-  MISCELLANEOUS CONFIGURATION  -#-#-#-#-#-#-#-#-#-#
#                                                                     #

# Files block - contains files whose contents are used by the ircd
#
#   motd - displayed on connect and when a user executes /MOTD
#   rules - displayed when the user executes /RULES
# Modules can also define their own files
<files motd="conf/examples/motd.txt.example" rules="conf/examples/rules.txt.example">

# Example of an executable file include. Note this will be read on rehash,
# not when the command is run.
#<execfiles rules="wget -O - http://www.example.com/rules.txt">

#-#-#-#-#-#-#-#-#-#-#-# MAXIMUM CHANNELS -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #

<channels
          # users: Maximum number of channels a user can be in at once.
          users="20"

# opers: Maximum number of channels an oper can be in at once.
          opers="60">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-# DNS SERVER -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# If these values are not defined, InspIRCd uses the default DNS resolver
# of your system.

<dns
     # server: DNS server to use to attempt to resolve IP's to hostnames.
     # in most cases, you won't need to change this, as inspircd will
     # automatically detect the nameserver depending on /etc/resolv.conf
     # (or, on Windows, your set nameservers in the registry.)
     # Note that this must be an IP address and not a hostname, because
     # there is no resolver to resolve the name until this is defined!
     #
     # server="127.0.0.1"

# timeout: seconds to wait to try to resolve DNS/hostname.
     timeout="5">

# An example of using an IPv6 nameserver
#<dns server="::1" timeout="5">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#  PID FILE  -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# Define the path to the PID file here. The PID file can be used to   #
# rehash the ircd from the shell or to terminate the ircd from the    #
# shell using shell scripts, perl scripts, etc... and to monitor the  #
# ircd's state via cron jobs. If this is a relative path, it will be  #
# relative to the configuration directory, and if it is not defined,  #
# the default of 'inspircd.pid' is used.                              #
#                                                                     #

#-#-#-#-#-#-#-#-#-#-#-#-#- BANLIST LIMITS #-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# Use these tags to customise the ban limits on a per channel basis.  #
# The tags are read from top to bottom, and any tag found which       #
# matches the channels name applies the banlimit to that channel.     #
# It is advisable to put an entry with the channel as '*' at the      #
# bottom of the list. If none are specified or no maxbans tag is      #
# matched, the banlist size defaults to 64 entries.                   #
#                                                                     #

#-#-#-#-#-#-#-#-#-#-#-  DISABLED FEATURES  -#-#-#-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# This tag is optional, and specifies one or more features which are  #
# not available to non-operators.                                     #
#                                                                     #
# For example you may wish to disable NICK and prevent non-opers from #
# changing their nicknames.                                           #
# Note that any disabled commands take effect only after the user has #
# 'registered' (e.g. after the initial USER/NICK/PASS on connection)  #
# so for example disabling NICK will not cripple your network.        #
#                                                                     #
# You can also define if you want to disable any channelmodes         #
# or usermodes from your users.                                       #
#                                                                     #
# `fakenonexistant' will make the ircd pretend that nonexistant       #
# commands simply don't exist to non-opers ("no such command").       #
#                                                                     #
#<disabled commands="TOPIC MODE" usermodes="" chanmodes="" fakenonexistant="yes">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-  RTFM LINE  -#-#-#-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
#   Just remove this... Its here to make you read ALL of the config   #
#   file options ;)                                                   #

#<die value="You should probably edit your config *PROPERLY* and try again.">

#-#-#-#-#-#-#-#-#-#-#-#-#-  SERVER OPTIONS   -#-#-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
#   Settings to define which features are usable on your server.      #
#                                                                     #

<options
         # prefixquit: What (if anything) users' quit messages
         # should be prefixed with.
         prefixquit="Quit: "

# suffixquit: What (if anything) users' quit messages
         # should be suffixed with.
         suffixquit=""

# prefixpart: What (if anything) users' part messages
         # should be prefixed with.
         prefixpart="""
         # NOTE: Use """ instead of """ if not using <config format="xml">

# suffixpart: What (if anything) users' part message
         # should be suffixed with.
         suffixpart="""

# fixedquit: Set all users' quit messages to this value.
         #fixedquit=""

# fixedpart: Set all users' part messages in all channels
         # to this value.
         #fixedpart=""

# syntaxhints: If enabled, if a user fails to send the correct parameters
         # for a command, the ircd will give back some help text of what
         # the correct parameters are.
         syntaxhints="no"

# cyclehosts: If enabled, when a user gets a host set, it will cycle
         # them in all their channels. If not, it will simply change their host
         # without cycling them.
         cyclehosts="yes"

# cyclehostsfromuser: If enabled, the source of the mode change for
         # cyclehosts will be the user who cycled. This can look nicer, but
         # triggers anti-takeover mechanisms of some obsolete bots.
         cyclehostsfromuser="no"

# ircumsgprefix: Use undernet-style message prefixing for NOTICE and
         # PRIVMSG. If enabled, it will add users' prefix to the line, if not,
         # it will just message the user normally.
         ircumsgprefix="no"

# announcets: If set to yes, when the timestamp on a channel changes, all users
         # in the channel will be sent a NOTICE about it.
         announcets="yes"

# allowmismatch: Setting this option to yes will allow servers to link even
         # if they don't have the same "optionally common" modules loaded. Setting this to
         # yes may introduce some desyncs and unwanted behaviour.
         allowmismatch="no"

# defaultbind: Sets the default for <bind> tags without an address. Choices are
         # ipv4 or ipv6; if not specified, IPv6 will be used if your system has support,
         # falling back to IPv4 otherwise.
         defaultbind="auto"

# hostintopic: If enabled, channels will show the host of the topic setter
         # in the topic. If set to no, it will only show the nick of the topic setter.
         hostintopic="yes"

# pingwarning: If a server does not respond to a ping within x seconds,
         # it will send a notice to opers with snomask +l informing that the server
         # is about to ping timeout.
         pingwarning="15"

# serverpingfreq: How often pings are sent between servers (in seconds).
         serverpingfreq="60"

# defaultmodes: What modes are set on a empty channel when a user
         # joins it and it is unregistered.
         defaultmodes="nt"

# moronbanner: This is the text that is sent to a user when they are
         # banned from the server.
         moronbanner="You're banned! Email abuse@example.com with the ERROR line below for help."

# exemptchanops: exemptions for channel access restrictions based on prefix.
         exemptchanops="nonick:v flood:o"

# invitebypassmodes: This allows /invite to bypass other channel modes.
         # (Such as +k, +j, +l, etc.)
         invitebypassmodes="yes"

# nosnoticestack: This prevents snotices from 'stacking' and giving you
         # the message saying '(last message repeated X times)'. Defaults to no.
         nosnoticestack="no"

# welcomenotice: When turned on, this sends a NOTICE to connecting users
         # with the text Welcome to <networkname>! after successful registration.
         # Defaults to yes.
         welcomenotice="yes">

#-#-#-#-#-#-#-#-#-#-#-# PERFORMANCE CONFIGURATION #-#-#-#-#-#-#-#-#-#-#
#                                                                     #

<performance
             # netbuffersize: Size of the buffer used to receive data from clients.
             # The ircd may only read this amount of text in 1 go at any time.
             netbuffersize="10240"

# somaxconn: The maximum number of connections that may be waiting
             # in the accept queue. This is *NOT* the total maximum number of
             # connections per server. Some systems may only allow this to be up
             # to 5, while others (such as Linux and *BSD) default to 128.
             somaxconn="128"

# limitsomaxconn: By default, somaxconn (see above) is limited to a
             # safe maximum value in the 2.0 branch for compatibility reasons.
             # This setting can be used to disable this limit, forcing InspIRCd
             # to use the value specified above.
             limitsomaxconn="true"

# softlimit: This optional feature allows a defined softlimit for
             # connections. If defined, it sets a soft max connections value.
             softlimit="12800"

# quietbursts: When syncing or splitting from a network, a server
             # can generate a lot of connect and quit messages to opers with
             # +C and +Q snomasks. Setting this to yes squelches those messages,
             # which makes it easier for opers, but degrades the functionality of
             # bots like BOPM during netsplits.
             quietbursts="yes"

# nouserdns: If enabled, no DNS lookups will be performed on
             # connecting users. This can save a lot of resources on very busy servers.
             nouserdns="no">

#-#-#-#-#-#-#-#-#-#-#-# SECURITY CONFIGURATION  #-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #

<security

# announceinvites: This option controls which members of the channel
          # receive an announcement when someone is INVITEd. Available values:
          # 'none' - don't send invite announcements
          # 'all' - send invite announcements to all members
          # 'ops' - send invite announcements to ops and higher ranked users
          # 'dynamic' - send invite announcements to halfops (if available) and
          #             higher ranked users. This is the recommended setting.
          announceinvites="dynamic"

# hidemodes: If enabled, then the listmodes given will be hidden
          # from users below halfop. This is not recommended to be set on +b
          # as it may break some functionality in popular clients such as mIRC.
          hidemodes="eI"

# hideulines: If this value is set to yes, U-lined servers will
          # be hidden from non-opers in /links and /map.
          hideulines="no"

# flatlinks: If this value is set to yes, /map and /links will
          # be flattened when shown to non-opers.
          flatlinks="no"

# hidewhois: When defined, the given text will be used in place
          # of the server a user is on when whoised by a non-oper. Most
          # networks will want to set this to something like "*.netname.net"
          # to conceal the actual server a user is on.
          # Note that enabling this will cause users' idle times to only be
          # shown when the format /WHOIS <nick> <nick> is used.
          hidewhois=""

# hidebans: If this value is set to yes, when a user is banned ([gkz]lined)
          # only opers will see the ban message when the user is removed
          # from the server.
          hidebans="no"

# hidekills: If defined, replaces who set a /kill with a custom string.
          hidekills=""

# hidesplits: If enabled, non-opers will not be able to see which
          # servers split in a netsplit, they will only be able to see that one
          # occurred (If their client has netsplit detection).
          hidesplits="no"

# maxtargets: Maximum number of targets per command.
          # (Commands like /notice, /privmsg, /kick, etc)
          maxtargets="20"

# customversion: Displays a custom string when a user /version's
          # the ircd. This may be set for security reasons or vanity reasons.
          customversion=""

# operspywhois: show opers (users/auspex) the +s channels a user is in. Values:
          #  splitmsg  Split with an explanatory message
          #  yes       Split with no explanatory message
          #  no        Do not show
          operspywhois="no"

# runasuser: If this is set, InspIRCd will attempt to switch
          # to run as this user, which allows binding of ports under 1024.
          # You should NOT set this unless you are starting as root.
          # NOT SUPPORTED/NEEDED UNDER WINDOWS.
          #runasuser=""

# runasgroup: If this is set, InspIRCd will attempt to switch
          # to run as this group, which allows binding of ports under 1024.
          # You should NOT set this unless you are starting as root.
          # NOT SUPPORTED/NEEDED UNDER WINDOWS.
          #runasgroup=""

# restrictbannedusers: If this is set to yes, InspIRCd will not allow users
          # banned on a channel to change nickname or message channels they are
          # banned on.
          restrictbannedusers="yes"

# genericoper: Setting this value to yes makes all opers on this server
          # appear as 'is an IRC operator' in their WHOIS, regardless of their
          # oper type, however oper types are still used internally. This only
          # affects the display in WHOIS.
          genericoper="no"

# userstats: /stats commands that users can run (opers can run all).
          userstats="Pu">

#-#-#-#-#-#-#-#-#-#-#-#-# LIMITS CONFIGURATION  #-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# This configuration tag defines the maximum sizes of various types   #
# on IRC, such as the maximum length of a channel name, and the       #
# maximum length of a channel. Note that with the exception of the    #
# identmax value all values given here are the exact values you would #
# expect to see on IRC. This contrasts with the older InspIRCd        #
# releases where these values would be one character shorter than     #
# defined to account for a null terminator on the end of the text.    #
#                                                                     #
# These values should match network-wide otherwise issues will occur. #
#                                                                     #
# The highest safe value you can set any of these options to is 500,  #
# but it is recommended that you keep them somewhat                   #
# near their defaults (or lower).                                     #

<limits
        # maxnick: Maximum length of a nickname.
        maxnick="31"

# maxchan: Maximum length of a channel name.
        maxchan="64"

# maxmodes: Maximum number of mode changes per line.
        maxmodes="20"

# maxident: Maximum length of a ident/username.
        maxident="11"

# maxquit: Maximum length of a quit message.
        maxquit="255"

# maxtopic: Maximum length of a channel topic.
        maxtopic="307"

# maxkick: Maximum length of a kick message.
        maxkick="255"

# maxgecos: Maximum length of a GECOS (realname).
        maxgecos="128"

# maxaway: Maximum length of an away message.
        maxaway="200">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
# Logging
# -------
#
# Logging is covered with the <log> tag, which you may use to change
# the behaviour of the logging of the IRCd.
#
# In InspIRCd as of 1.2, logging is pluggable and very extensible.
# Different files can log the same thing, different 'types' of log can
# go to different places, and modules can even extend the log tag
# to do what they want.
#
# An example log tag would be:
#  <log method="file" type="OPER" level="default" target="logs/opers.log">
# which would log all information on /oper (failed and successful) to
# a file called opers.log.
#
# There are many different types which may be used, and modules may
# generate their own. A list of useful types:
#  - USERS - information relating to user connection and disconnection
#  - OPER - succesful and failed oper attempts
#  - KILL - kill related messages
#  - snomask - server notices (*all* snomasks will be logged)
#  - FILTER - messages related to filter matches (m_filter)
#  - CONFIG - configuration related messages
#  - COMMAND - die and restart messages, and messages related to unknown user types
#  - SOCKET - socket engine informational/error messages
#  - MODULE - module related messages
#  - STARTUP - messages related to starting up the server
#
# You may also log *everything* by using a type of *, and subtract things out
# of that by using -TYPE - for example "* -USERINPUT -USEROUTPUT".
#
# Useful levels are:
#  - default (general messages, including errors)
#  - sparse (misc error messages)
#  - debug (debug messages)
#
# Some types only produce output in the debug level, those are:
#  - BANCACHE - ban cache debug messages
#  - CHANNELS - information relating to joining/creating channels
#  - CULLLIST - debug messages related to issues with removing users
#  - RESOLVER - DNS related debug messages
#  - CONNECTCLASS - Connection class debug messages
#  - USERINPUT
#  - USEROUTPUT
#
# The following log tag is highly default and uncustomised. It is recommended you
# sort out your own log tags. This is just here so you get some output.

#-#-#-#-#-#-#-#-#-#-#-#-#-  WHOWAS OPTIONS   -#-#-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# This tag lets you define the behaviour of the /whowas command of    #
# your server.                                                        #
#                                                                     #

<whowas
        # groupsize: Maximum entries per nick shown when performing
        # a /whowas nick.
        groupsize="10"

# maxgroups: Maximum number of nickgroups that can be added to
        # the list so that /whowas does not use a lot of resources on
        # large networks.
        maxgroups="100000"

# maxkeep: Maximum time a nick is kept in the whowas list
        # before being pruned. Time may be specified in seconds,
        # or in the following format: 1y2w3d4h5m6s. Minimum is
        # 1 hour.
        maxkeep="3d">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-  BAN OPTIONS  -#-#-#-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# The ban tags define nick masks, host masks and ip ranges which are  #
# banned from your server. All details in these tags are local to     #
# Your server.                                                        #
#                                                                     #

<badip
       # ipmask: IP range to ban. Wildcards and CIDR can be used.
       ipmask="192.0.2.69"

# reason: Reason to display when user is disconnected.
       reason="No porn here thanks.">

<badnick
         # nick: Nick to disallow. Wildcards are supported.
         nick="ChanServ"

# reason: Reason to display on /nick.
         reason="Reserved For Services">

<badhost
         # host: ident@hostname to ban.
         # Wildcards and CIDR (if you specify an IP) can be used.
         host="*@banneduser.example.net"

# reason: Reason to display when user is disconnected
         reason="Evading Bans">

# exception: Hosts that are exempt from [kgz]lines.
<exception
           # host: ident@hostname to exempt.
           # Wildcards and CIDR (if you specify an IP) can be used.
           host="*@ircop.example.com"

# reason: Reason for exception. Only shown in /stats e
           reason="Oper's hostname">

#-#-#-#-#-#-#-#-#-#-#- INSANE BAN OPTIONS  -#-#-#-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
# This optional tag allows you to specify how wide a gline, eline,    #
# kline, zline or qline can be before it is forbidden from being      #
# set. By setting hostmasks="yes", you can allow all G, K, E lines,   #
# no matter how many users the ban would cover. This is not           #
# recommended! By setting ipmasks="yes", you can allow all Z lines,   #
# no matter how many users these cover too. Needless to say we        #
# don't recommend you do this, or, set nickmasks="yes", which will    #
# allow any qline.                                                    #
#                                                                     #

<insane
        # hostmasks: Allow bans with insane hostmasks. (over-reaching bans)
        hostmasks="no"

# ipmasks: Allow bans with insane ipmasks. (over-reaching bans)
        ipmasks="no"

# nickmasks: Allow bans with insane nickmasks. (over-reaching bans)
        nickmasks="no"

# trigger: What percentage of users on the network to trigger
        # specifying an insane ban as. The default is 95.5%, which means
        # if you have a 1000 user network, a ban will not be allowed if it
        # will be banning 955 or more users.
        trigger="95.5">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#- YAWN  -#-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#                                                                     #
#   You should already know what to do here :)                        #

#<die value="User error. You didn't edit your config properly. Go back and try again.">

#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# MODULES #-#-#-#-#-#-#-#-#-#-#-#-#-#-#
#    ____                _   _____ _     _       ____  _ _   _        #
#   |  _  ___  __ _  __| | |_   _| |__ (_)___  | __ )(_) |_| |       #
#   | |_) / _ / _` |/ _` |   | | | '_ | / __| |  _ | | __| |       #
#   |  _ <  __/ (_| | (_| |   | | | | | | __  | |_) | | |_|_|       #
#   |_| ____|__,_|__,_|   |_| |_| |_|_|___/ |____/|_|__(_)       #
#                                                                     #
# Well done, you've reached the end of the basic configuration, your  #
# ircd should now start if you want to try it out! (./inspircd start) #
#                                                                     #
# We now suggest you read and edit modules.conf, as modules are what  #
# provide almost all the features of InspIRCd. :)                     #
#                                                                     #
# The default does nothing -- we include it for simplicity for you.   #
<include file="conf/examples/modules.conf.example">

# Here are some pre-built modules.conf files that closely match the
# default configurations of some popular IRCd's. You still may want to
# look over them and make sure if everything is correct for you and setup
# the proper SSL information.
#
# *NOTE*: These files have no comments for what the modules do. If you
# are interested in that, please read the modules.conf.example. It is also
# recommended that you make your own modules file based on modules.conf.example.

# Settings similar to UnrealIRCd defaults.
#<include file="conf/examples/modules/unrealircd.conf.example">

# Settings similar to Charybdis IRCd defaults.
#<include file="conf/examples/modules/charybdis.conf.example">

#########################################################################
#                                                                       #
#                     - InspIRCd Development Team -                     #
#                        http://www.inspircd.org                        #
#                                                                       #
#########################################################################

Syntax:
Protect this paste?
Protecting your paste means only Anope Team members and Contributors can see it.